First Multi‐Isotopic (Pb‐Nd‐Sr‐Zn‐Cu‐Fe) Characterisation of Dust Reference Materials (ATD and BCR‐723): A Multi‐Column Chromatographic Method Optimised to Trace Mineral and Anthropogenic Dust Sources     

Aubry Vanderstraeten  Steeve Bonneville  Stefania Gili  Jeroen de Jong  Wendy Debouge  Philippe Claeys  Nadine Mattielli 《Geostandards and Geoanalytical Research》2020,44(2):307-329

Atmospheric dust is an integral component of the Earth system with major implications for the climate, biosphere and public health. In this context, identifying and quantifying the provenance and the processes generating the various types of dust found in the atmosphere is paramount. Isotopic signatures of Pb, Nd, Sr, Zn, Cu and Fe are commonly used as sensitive geochemical tracers. However, their combined use is limited by the lack of (a) a dedicated chromatographic protocol to separate the six elements of interest for low‐mass samples and (b) specific reference materials for dust. Indeed, our work shows that USGS rock reference materials BHVO‐2, AGV‐2 and G‐2 are not applicable as substitute reference materials for dust. We characterised the isotopic signatures of these six elements in dust reference materials ATD and BCR‐723, representatives of natural and urban environments, respectively. To achieve this, we developed a specific procedure for dust, applicable in the 4–25 mg mass range, to separate the six elements using a multi‐column ion‐exchange chromatographic method and MC‐ICP‐MS measurements.  相似文献   

甘肃北山老金厂金矿床载金矿物特征、原位硫同位素组成及其对成矿的指示意义     

黄式庭  于晓飞  吕志成  刘家军  李永胜  杜泽忠  吕鑫  孙海瑞  杜轶伦 《吉林大学学报(地球科学版)》2020,50(5):1387-1403

老金厂金矿床是北山成矿南带最具代表性的中低温岩浆热液型金矿床之一，其规模为中型。依据脉体穿插、矿物共生组合和矿石结构构造等特征，将矿床矿化作用过程划分为石英-黄铁矿阶段（Ⅰ）、石英-含砷黄铁矿-毒砂阶段（Ⅱ）、石英-黄铁矿-多金属硫化物阶段（Ⅲ）和石英-方解石阶段（Ⅳ）。利用电子探针研究了不同成矿阶段载金矿物的元素组成及其分布规律。Ⅰ阶段：黄铁矿以粗粒自形立方体为主，粒度为0.50~1.50 mm，贫As、Au；毒砂含量极少，呈细粒他形。Ⅱ阶段：含砷黄铁矿周围常有大量毒砂产出，含砷黄铁矿多为立方体、五角十二面体，粒度为0.30~1.00 mm，富As、Au；该阶段矿化最为强烈，毒砂主要形成于此时期，多呈棱柱状、柱状、放射状集合体，显示富S亏As特征。Ⅲ阶段：多以黄铁矿-黄铜矿-闪锌矿共生组合脉的形式产出，黄铁矿多呈长条状，以富S、Cu、Zn、Au和贫Fe、As为特征。Ⅳ阶段：矿化作用极弱，毒砂、黄铁矿含量极少，为细粒他形。原位硫同位素组成显示：Ⅰ阶段黄铁矿δ³⁴S_V-CDT值为-3.8‰~-2.9‰，均值为-3.3‰；Ⅱ阶段黄铁矿和毒砂δ³⁴S_V-CDT值为-4.7‰~2.6‰，均值为-3.3‰；Ⅲ阶段黄铁矿和闪锌矿δ³⁴S_V-CDT值主要分布于-1.9‰~1.0‰之间，均值为0.1‰。此3个阶段硫同位素组成反映了成矿期硫主要来源于幔源岩浆，混入了部分地层硫。综合前人研究成果，认为成矿早期至晚期，成矿流体总体上由富S贫As向富As贫S演化。Ⅰ阶段体系处于中性稳定的环境，硫源充足；Ⅱ阶段为贫S富As的高氧逸度环境，由于大气降水对地层的淋滤渗透，混入富As流体，Au可能与As结合形成Au-As络合物，在成矿有利部位富集沉淀；Ⅲ阶段成矿元素种类丰富，体系为富S贫As的弱还原环境，Au很可能与HS^-、S^-形成络合物进入黄铁矿晶格。  相似文献   

贵州苗匡热矿水地热区水化学特征及热储条件分析     

杨晓飞 《地质与勘探》2020,56(1):94-101

贵州苗匡热矿水地热区大地构造位于江南复合造山黔南坳陷铜仁复式褶皱变形带,区域构造为红石古断裂带与苗匡断裂交汇锐角区,区内出露的地层有前南华系板溪群、南华系、震旦系、寒武系;热矿水水化学类型为HCO_3-Na型,含高氟、锶、锂、偏硅酸;弱碱性水;呈带状中低温热储;区域大地热流供给热量;地下热矿水补给为构造破碎带深远程补给;区域性红石活动断裂带具有导热导水储水性,热矿水被温差、压力差等驱动循环运移至断裂破碎带富集,苗匡次级断裂带在该热储起到连通传导作用;热矿水井口温度45℃,出水量560 m~3/d。研究结果可对该区热矿水勘查开发及利用提供参考和借鉴。  相似文献   

凤太矿集区东塘子铅锌矿床S、Pb同位素组成对成矿物质来源的示踪     

张革利  田涛  王瑞廷  高卫宏  常宗东 《中国地质》2020,47(2):472-484

东塘子铅锌矿床是秦岭成矿带中典型的铅锌矿床之一,前人对东塘子铅锌矿床成矿作用研究较多,但受限于测试手段及认识的局限性,多年来对其物质来源的认识仍未统一。本文在充分研究东塘子铅锌矿床地质特征的基础上,开展了相关样品的S、Pb同位素分析,分析对象包括了不同类型的铅锌矿石,讨论了该铅锌矿床的成矿物质来源、区内岩浆岩与铅锌成矿的关系等。研究表明:东塘子铅锌矿床矿石硫化物δ34S值变化范围为1.8‰～12.5‰,平均7.50‰,计算获得成矿流体中总硫δ34S∑S为7.7‰,显示海水硫酸盐(蒸发膏岩)与岩浆硫的混合来源特征。矿石铅同位素组成稳定,铅源主要来自富U-Th-Pb的上地壳与深部,可能与深部岩浆活动有关。研究结果表明,东塘子铅锌矿床的成矿过程与南秦岭印支期大规模多阶段构造-岩浆-流体活动密切相关,为下一阶段区内找矿工作提供了新的思路。  相似文献   

晋北煅烧高岭土用煤矸石的应用矿物学特征   总被引：1，自引：0，他引：1  

侯龙超  王哲皓  汪灵  周东晓 《矿物学报》2020,(2):149-154

为了给晋北煅烧高岭土用煤矸石的评价和开发利用提供科学依据,采用XRD、XRF、SEM和白度计等现代分析测试技术,研究了晋北煅烧高岭土用煤矸石的应用矿物学特征。结果表明:1)根据造纸和涂料用煅烧高岭土的国家标准,晋北煤矸石主要可分为3种类型:合格原料、基本合格原料和不合格原料。2)与合格和基本合格原料相比,不合格原料煅烧产物的化学成分中SiO2、Al2O3、Fe2O3含量以及碱金属与碱土金属总含量都与前者有较大差异。3)合格和基本合格原料主要由高岭石(85%~94%)组成,不合格煤矸石矿物组合为高岭石(30%~60%)+石英(23%~38%)+伊利石(14%~26%),并含少量黄铁矿和白云石等杂质矿物,石英等杂质矿物和含铁矿物是分别导致煅烧产物化学成分和白度不合格的主要原因。4)合格原料中高岭石结晶度较好,主要为不规则片状、书册状和弯曲片状,片表面光滑,片径大小范围较大,为0.05~51.22μm,平均2.80μm,径厚比41.24。  相似文献   

山东大尹格庄金矿床深部三维定量成矿预测     

陈进  毛先成  邓浩 《地球学报》2020,41(2):179-191

大尹格庄金矿是胶西北招平断裂带中段的大型金矿床,但随着逐渐的开采其保有资源量不断下降,急需在矿床的深边部区域开展接续资源找矿工作。本文以大尹格庄金矿为研究对象,以区域成矿理论和找矿勘查模型为指导,利用三维地质建模技术构建了相关地质体的三维模型,在此基础上,采用定量化的方法提取地质体与成矿相关的控矿因素指标和矿化指标,并建立了三维定量成矿预测模型,并应用该模型圈定了3个找矿靶区。研究表明,该方法能够适用于大中型矿山的深边部找矿工作,其三维及定量化的预测结果能够为后续的勘探及开采工作提供重要参考。  相似文献   

大洋地幔橄榄岩-铬铁矿中的金刚石和深地幔再循环     

杨经绥 《地质力学学报》2020,26(5):731-741

全球多地蛇绿岩型地幔橄榄岩和铬铁矿中发现微粒金刚石，并在中国西藏南部和俄罗斯乌拉尔北部的蛇绿岩铬铁矿中发现原位产出的金刚石，认为是地球上金刚石的一种新的产出类型，不同于金伯利岩型金刚石和超高压变质型金刚石。它们与呈斯石英假象的柯石英、高压相的铬铁矿和青松矿等高压矿物以及碳硅石和单质矿物等强还原矿物伴生，指示蛇绿岩中的这些矿物组合形成于深度150~300 km或者更深的地幔。金刚石具有很轻的C同位素组成（δ13C-18‰~-28‰），并出现多种含Mn矿物和壳源成分包裹体。研究认为它们曾是早期深俯冲的地壳物质，达到>300 km深部地幔或地幔过渡带后，经历了熔融并产生新的流体，后者在上升过程中结晶成新的超高压、强还原矿物组合，通过地幔对流或地幔柱作用被带回到浅部地幔，由此建立了一个俯冲物质深地幔再循环的新模式。蛇绿岩型地幔橄榄岩和铬铁矿中发现金刚石等深部矿物，质疑了蛇绿岩铬铁矿形成于浅部地幔的已有认识，引发了一系列新的科学问题，提出了新的研究方向。   相似文献   

Long‐term temporal and spatial patterns in bioeroding sponge distribution at the Abrolhos Bank,Brazil, Southwestern Atlantic     

Fernando Coreixas de Moraes  Fernanda Cervi  Cludia S. Karez  Leonardo T. Salgado  Rodrigo L. Moura  Gabriella A. Leal  Alex C. Bastos  Gilberto M. Amado‐Filho 《Marine Ecology》2019,40(3)

Bioeroding sponges belong to the most dominant bioeroders, significantly contributing to the erosion of coral reefs. Some species are tolerant or even benefit from environmental conditions such as ocean warming, acidification, and eutrophication. In consequence, increases in sponge bioerosion have been observed on some coral reefs over the last decades. The Abrolhos Bank is the largest coral reef system in the South Atlantic. It has been affected by sedimentation, eutrophication, overfishing, and climate change, mainly affecting coastal reefs, and at lesser intensity outer ones as well. This study aimed to describe spatial and temporal patterns in bioeroding sponge distribution in carbonate substrates in the Abrolhos Bank. Photo‐quadrats were used to compare bioeroding sponge abundance between two shallow reefs: a coastal, Pedra de Leste (PL), and an outer reef, Parcel dos Abrolhos (PAB). Each individual was delimitated over the substrate by determining the sponge surface through a line connecting the outermost papillae. The study was conducted over 6 years in 2008–2009 and 2013–2016. Four species of bioeroding sponges were identified: Cliona carteri Ridley, 1881, C. delitrix Pang, 1973, C. cf. schmidtii Ridley, 1881, and Siphonodictyon coralliphagum Rützler, 1971. The distribution and abundance of species varied between the inner and outer reefs and across the years, and displayed certain selectivity for the calcareous substrates recorded. Crustose coralline algae (CCA) were the main substrate excavated by the most abundant bioeroding species, C. carteri, and represented 70% of the substrate types occupied by this sponge (CCA, coral overgrown by CCA and plain coral). The highest abundance of bioeroding sponges observed in photo‐quadrats was 21.3 individuals/m² at the outer reefs (PAB) in 2014. The abundances or areal extents of bioeroding sponges were up to 10 times greater on the outer reefs than on the coastal ones, where sedimentation is higher and more strongly influenced by siliciclastic material. Moreover, a higher herbivorous fish biomass has been reported on outer reefs which could also influence the higher abundance of bioeroding sponges in outer reefs. During the study period of 6 years, an increase in bioeroding sponge abundance was observed at the outer reefs (PAB), with the sea surface temperature increase. As CCA have an important role in reefal cementation and carbonate production in the Abrolhos reefs, a bioerosion impact might be expected, in particular, on the outer reefs.  相似文献   

基于STIRPAT模型的内蒙古沙漠化地区环境压力分析     

樊胜岳  刘文文  周宁 《中国沙漠》2019,39(3):117-125

实现经济与生态环境的协调发展，已经成为当前治理沙漠化的巨大挑战。如何定量分析人类活动和自然条件对环境的影响，是当前环境经济学界研究的热点问题。以内蒙古自治区71个沙漠化县为研究对象，以1986—2010年为研究区间做面板空间计量实证分析。选取了人口、富裕度、技术水平、风速和降水作为环境基础指标构建STIRPAT模型，从环境压力内在驱动角度定量分析不同的自然因素和人为因素对沙漠化地区环境的综合影响。结果表明：在观测数据范围内，富裕度、技术水平、风速和降水是内蒙古自治区环境压力的主要驱动因素；富裕度每增加1%，环境压力显著增加0.096%；技术水平每变化1%，将引起环境压力相应发生0.084%的变化；风速和降水每变动1%分别使得沙漠地区环境压力显著地增加0.640%和减少0.216%。  相似文献   

Phase equilibrium modelling of the amphibolite to granulite facies transition in metabasic rocks (Ivrea Zone,NW Italy)     

Barbara E. Kunz  Richard W. White 《Journal of Metamorphic Geology》2019,37(7):935-950

The development of thermodynamic models for tonalitic melt and the updated clinopyroxene and amphibole models now allow the use of phase equilibrium modelling to estimate P–T conditions and melt production for anatectic mafic and intermediate rock types at high‐T conditions. The Permian mid‐lower crustal section of the Ivrea Zone preserves a metamorphic field gradient from mid amphibolite facies to granulite facies, and thus records the onset of partial melting in metabasic rocks. Interlayered metabasic and metapelitic rocks allows the direct comparison of P–T estimates and partial melting between both rock types with the same metamorphic evolution. Pseudosections for metabasic compositions calculated in the Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O (NCKFMASHTO) system are presented and compared with those of metapelitic rocks calculated with consistent end‐member data and a–x models. The results presented in this study show that P–T conditions obtained by phase equilibria modelling of both metabasic and metapelitic rocks give consistent results within uncertainties, allowing integration of results obtained for both rock types. In combination, the calculations for both metabasic and metapelitic rocks allows an updated and more precisely constrained metamorphic field gradient for Val Strona di Omegna to be defined. The new field gradient has a slightly lower dP/dT which is in better agreement with the onset of crustal thinning of the Adriatic margin during the Permian inferred in recent studies.  相似文献